欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
VMC850F五轴联动机床坐标变换的研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

柳州市机械及机电一体化产业关键技术攻关项目(2011C030107)


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以某数控机床研究所研发的VMC850F五轴联动机床为例,通过坐标系统间的变换关系,推导出了刀轴矢量及刀位点运动换模型,对该模型方程进行了求解。根据此算法开发了后置处理器,通过在VMC850F机床上加工叶轮样件得到了验证,为五轴后置处理器的开发提供了参考。

    Abstract:

    Taking VMC850F five-axis linkage machine manufactured by some research institute of CNC machine as an example, the transformational model for the cutter location vector and its points was deduced based on conversion connection of coordinate systems,and then the model equations were solved. According to the arithmetic, a post processing software was developed, which was verified by a impeller model process on VMC850F machine.It provides reference for five axis post processor development.

    参考文献
    相似文献
    引证文献
引用本文

唐清春,张健. VMC850F五轴联动机床坐标变换的研究[J].机床与液压,2014,42(3):35-37.
.[J]. Machine Tool & Hydraulics,2014,42(3):35-37

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2014-12-24
  • 出版日期: