欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
船用螺旋桨数控加工干涉仿真及刀轴方向控制技术研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

船舶先进设计制造技术省级重点实验室开放研究基金;江苏科技大学研究生创新计划(YCX11S_06)


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    干涉检测是螺旋桨数控加工中的关键问题,如果在加工过程中发生干涉,会破坏机床甚至造成重大损失。基于UG软件,构建了螺旋桨加工仿真平台,利用该平台进行螺旋桨加工过程仿真和干涉分析;在虚拟环境中,检验数控程序是否干涉;针对虚拟仿真过程中发现的发生干涉的刀位点,反复自动调整刀轴矢量,计算出无干涉刀轴矢量数据,优化数控程序,以避免干涉碰撞,提高了数控程序编程效率。

    Abstract:

    Interference detection is the key issue in the propeller CNC machining. If interference occurs in the process, the machine will be destroyed or even significant losses are resulted in. Propeller machining simulation platform was built based on UG software. With the platform, propeller process simulation and interference analysis were carried out.The NC program was checked in a virtual environment to judge whether there was interference.At the interference points found in the virtual simulation process, tool axis vectors were adjusted automatically, no interference tool axis vector data were calculated, the NC program was optimized.So collisions can be avoided, NC programming efficiency is increased.

    参考文献
    相似文献
    引证文献
引用本文

张胜文,刘传伦,朱成顺,方喜峰.船用螺旋桨数控加工干涉仿真及刀轴方向控制技术研究[J].机床与液压,2014,42(10):22-24.
.[J]. Machine Tool & Hydraulics,2014,42(10):22-24

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-01-09
  • 出版日期: