欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
基于ADAMS的3-TPS混联机床动态特性分析
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51175069);中央高校基本科研业务专项资金资助(N120403005)


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用ADAMS软件对3-TPS型混联机床进行振动测试分析和加工仿真分析,建立了机床动态仿真分析的刚柔耦合模型,分析了机床在各个方向的振动特性,仿真分析了切削力下机床刀尖位置的位移偏差。结果表明,该机床Y、Z方向的振动响应较大,X向的响应较小;在铣削力作用下,刀尖点位移产生了明显的偏移,致使机床的加工精度降低。

    Abstract:

    The 3-TPS hybrid machine tool was taken for vibration test analysis and simulation analysis by using the ADAMS software,and the rigid-flexible coupled model of the machine tool for dynamic simulation analysis was established.The vibration characteristics of the machine tool in each direction were analyzed,and the cutter point’s position deviation under cutting force was analyzed with simulation.The results show that the vibration response in Y,Z direction of the machine tool is larger and smaller in X direction;under the action of milling force,the cutter point’s displacement has appeared obvious deviation and made the machining accuracy reduced.

    参考文献
    相似文献
    引证文献
引用本文

孟祥志,赵柏庆.基于ADAMS的3-TPS混联机床动态特性分析[J].机床与液压,2014,42(9):6-9.
.[J]. Machine Tool & Hydraulics,2014,42(9):6-9

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-01-09
  • 出版日期: