欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
手动快速便携式超高压液压千斤顶研制
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

广东省科技计划项目重大专项资助项目(2012A090300011);韶关市科技计划项目(2011GXH/G09)


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    便携式液压千斤顶广泛应用于抗震救灾、消防救援、起重推移等领域,但体积大,单件部件重,携带不便,活塞动作速度慢,系统压力小。采用阶梯活塞式手动泵和带充液阀的双速液压缸分体式结构改进液压千斤顶,研究了千斤顶最大负载、柱塞上升速度的计算方法。工程实践表明:该产品携带方便,升降快速,单件部件质量小于25 kg、最高系统压力63 MPa,最大负载12×104 N,千斤顶上升速度637 mm/min。

    Abstract:

    The original portable hydraulic jack is often applied in earthquake relief work,rescue,hoisting and push,but its volume and single unit weight are big,its support force is not enough,its work efficiency is low,and it is not portable.An ultrahigh pressure manual hydrauliac jack based on ladder piston hand pump and hydraulic double speed cylinder with prefill valve was put forwarded.And the calculation methods for the maximun jack’s load and plunger speed were studied.The practical application shows that its single unit weight is less than 25 kg,its pressure is 63 MPa,its support force is 12×104 N,its plunger speed is 637 mm/min,and it is portable.

    参考文献
    相似文献
    引证文献
引用本文

黄长征,张文新.手动快速便携式超高压液压千斤顶研制[J].机床与液压,2014,42(8):81-83.
.[J]. Machine Tool & Hydraulics,2014,42(8):81-83

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2014-12-30
  • 出版日期: