欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
基于2R1T并联机构的自动调平控制系统设计与仿真
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(50965007)


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    分析了基于2R1T并联机构的自动调平系统运动学特性,给出该系统仿真模型下的控制策略和条件,为了提高轨迹追踪精度和减少系统受到的不确定的参数的影响,针对该平台模型设计了一种模糊自适应控制器,控制器使用平台位置传感器反馈信号,并可在模糊化界面实时修改PID参数。仿真结果证明该控制算法比传统PID能更有效减少位置误差。

    Abstract:

    The motion characteristics about automatic leveling system of parallel mechanisms based on 2R1T were analyzed,the control strategies and conditions for the simulation model were given. In order to improve the accuracy of position tracking and weaken the influence of uncertain parameters on automatic leveling system, a practical fuzzy adaptive controller was designed based on the kinematics of parallel platform, where fuzzy inference units were utilized to modify the PID parameters in real-time by using the position feedback from the robot actuators. The virtual experiment results demonstrate that the proposed algorithm is able to effectively reduce the position tracking errors compared with the traditional PID controller.

    参考文献
    相似文献
    引证文献
引用本文

江涛,朱大昌.基于2R1T并联机构的自动调平控制系统设计与仿真[J].机床与液压,2014,42(9):13-16.
.[J]. Machine Tool & Hydraulics,2014,42(9):13-16

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-01-09
  • 出版日期: