欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
司机门内板拉深成形影响因素的研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

湖南省教育厅科学计划项目(08C937)


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用有限元分析软件Dynaform对司机门内板拉深成形过程进行数值模拟,分析了产品成形的质量问题,依据模拟结果研究了凹模圆角半径R凹、压边力BHF和拉深筋布置等因素对产品成形质量的影响,确定了单个参数对司机门内板成形的影响趋势,研究结果对缩短研发制造周期,降低制造成本具有重要作用。

    Abstract:

    The deep draw forming process of a driver door inner panel was numerically simulated by using the finite element analysis (FEA) software Dynaform, and the quality problems in product forming were analyzed. The product forming quality influence that resulted from concave die radius, blank holder force (BHF) and draw-bead layout was studied according to the simulation results. The influence trends of single draw forming factor of the driver door inner panel were confirmed. The study result has great significance to shorten the research and development cycle, and reduce the cost of manufacturing.

    参考文献
    相似文献
    引证文献
引用本文

柳建安,陈黎,段艳强.司机门内板拉深成形影响因素的研究[J].机床与液压,2014,42(19):155-158.
.[J]. Machine Tool & Hydraulics,2014,42(19):155-158

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-01-28
  • 出版日期: