欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
机夹式型线铣刀刀片槽检测技术研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    机夹式型线铣刀主要用于核电轮槽加工。为了降本增效,研制该铣刀,刀体可重复利用。刀片槽决定各刀片的位置关系,对铣刀型线起决定性作用,但刀片槽的检测复杂,检测效率低下。在保证检测效率的同时,必需保证检测精度。基于Leitz Reference 600软件在三坐标测量仪上检测刀体刀片槽,研究出高效率测量该刀体刀片槽的方法;针对检测难点进行详细分析,解决了检测瓶颈,大大提高了工作效率。

    Abstract:

    Mechanically-clamped milling cutter is mainly used to process wheel trough of nuclear power. For reducing cost and accruing benefit, a mechanically-clamped milling cutter is developed which cutter body is reused. Insert pocket decides reference location of cutter body and shaped conductor of milling cutter. But the measuring to insert pocket is complex and measuring efficiency is low.And it is required that measuring accuracy must be guaranteed on the premise of guaranteeing measuring productivity. Based on Leitz Reference 600, insert pocket was measured in three coordinate measuring machine. The measuring difficulties were anatomized and measuring bottleneck was resolved.So the work efficiency is raised greatly.

    参考文献
    相似文献
    引证文献
引用本文

杨林建,刘淑香,徐化文,张金华.机夹式型线铣刀刀片槽检测技术研究[J].机床与液压,2014,42(20):120-123.
.[J]. Machine Tool & Hydraulics,2014,42(20):120-123

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-01-28
  • 出版日期: