欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
基于PMAC数控机床定位精度控制研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

陕西省工业攻关项目基金资助项目(2009K07-09)


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    数控机床定位精度和重复定位精度直接影响数控机床的加工精度。通过分析影响数控机床定位精度的原因,利用系统螺距误差补偿方法对数控机床进给系统的定位精度进行补偿。试验结果表明:该误差补偿策略显著提高了系统的位置精度和运动精度,为提高机床的加工精度奠定了基础。

    Abstract:

    NC machine tool machining accuracy is directly affected by NC machine tool positioning accuracy and repetitive positioning accuracy. Based on the analysis of effect factors for NC machine tool positioning accuracy, positioning accuracy of feed system was compensated by the method of pitch error compensation. The results show that the NC machine tool positioning accuracy and movement accuracy are significantly increased by the error compensation, and this method lays a foundation for improvement of machining accuracy.

    参考文献
    相似文献
    引证文献
引用本文

王占领.基于PMAC数控机床定位精度控制研究[J].机床与液压,2014,42(22):55-56.
.[J]. Machine Tool & Hydraulics,2014,42(22):55-56

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-06-17
  • 出版日期: