欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
大型龙门导轨磨床IPMP变频伺服液压系统设计
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    介绍一种节能环保的大型龙门导轨磨床IPMP变频伺服液压系统的设计及能耗计算。利用“定量泵+变频伺服电机”替代传统的“定量泵+比例调速阀”系统,通过变频器控制油泵的转速,用压力传感器和旋转编码器对压力及流量信号进行反馈,实现闭环控制,压力、流量可以按需输出,没有多余的功率被损耗。4组22 kW IPMP泵站设计可以满足大型龙门导轨磨床超重载、宽调速、低能耗要求。

    Abstract:

    The design about an energy saving and environmental protection type large gantry guideway grinder IPMP frequency servo hydraulic system and the energy consumption calculation were introduced. The “quantitative pump and frequency servo motor” was used to replace traditional “quantitative pump and proportional valve” system, through the inverter to control the pump speed, through pressure sensor and rotary encoder to feedback the pressure and flow signal, closed loop control was realized, pressure and flow can be output by required, no extra power loss. 4 groups of 22 kW IPMP pumping station design can meet requirements of overload, wide speed range, low power of the large gantry guideway grinder.

    参考文献
    相似文献
    引证文献
引用本文

.大型龙门导轨磨床IPMP变频伺服液压系统设计[J].机床与液压,2014,42(4):50-52.
.[J]. Machine Tool & Hydraulics,2014,42(4):50-52

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2014-12-24
  • 出版日期: