欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
油气悬挂实验台控制系统的研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

军队科研计划项目(2012BZ48)


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过分析伺服系统的设计原理完成对油气悬挂实验台的电液伺服控制系统的建模分析研究,并对控制系统的软件和硬件结构进行相应的分析设计,利用WinCC组态软件编制控制系统软件系统。在运动控制系统基础上进行了位置跟踪试验,结果验证了模糊PID控制器的轨迹规划策略和轨迹跟踪的工程有效性和可行性。

    Abstract:

    The modeling analysis study of the experimental units for the hydraulic servo control system of oil and gas suspension test bed was completed by analyzing the design principles of servo system. The corresponding analysis and design of the software and hardware architecture of control system were carried out, and the software system of the control system was compiled with configuration software WinCC. The position tracking experiments were conducted based on the motion control system. The results verify the effectiveness and feasibility of the project of the trajectory planning strategy and trajectory tracking of the fuzzy PID controller.

    参考文献
    相似文献
    引证文献
引用本文

晁智强,宁初明,韩寿松,刘相波,陈明明.油气悬挂实验台控制系统的研究[J].机床与液压,2015,43(5):57-59.
.[J]. Machine Tool & Hydraulics,2015,43(5):57-59

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-06-17
  • 出版日期: