欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
镍基高温合金脉冲电弧加工表面完整性研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51365053);机械制造系统工程国家重点实验室开放基金(SKLMS2013003)


Study of Nickel Base Superalloy Surface Integrity in Pulsed Arc Machining
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    研究脉冲电弧加工镍基高温合金表面微观形貌,包括变质层厚度及特征、加工表面粗糙度、显微硬度,综合考虑以上各方面,研究脉冲电弧工作时,脉冲频率、占空比两种加工参数对表面变质层完整性的影响规律,得出频率和占空比较高时更容易产生裂纹,较低的频率和占空比会使熔化凝固层的厚度提高。

    Abstract:

    Pulsed arc machining nickel base superalloy surface micro topography was studied. Metamorphic layer thickness and characteristics, surface roughness machining, and microhardness were included. By considering the above aspects comprehensively, the laws were studied of the surface integrity of metamorphic layer influenced by two kinds of processing parameters such as pulse frequency and duty cycle during pulsed arc machining. It is concluded that a higher frequency and duty cycle is more prone to producing cracks, and the lower is to increase the thickness of recast layer.

    参考文献
    相似文献
    引证文献
引用本文

朱晨光,周建平,汪兵兵.镍基高温合金脉冲电弧加工表面完整性研究[J].机床与液压,2015,43(11):27-29.
. Study of Nickel Base Superalloy Surface Integrity in Pulsed Arc Machining[J]. Machine Tool & Hydraulics,2015,43(11):27-29

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-11-11
  • 出版日期: