欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
活塞杆非接触密封在伺服液压缸中的应用及其对
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Use of Noncontact Seal in Servo Cylinder and Its Influence on Low Speed Stability of Hydraulic System
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用传统接触密封的伺服液压缸往往因为密封处较大的摩擦力以及静、动摩擦力之间的降落特性,导致其在低速运动时产生“爬行”现象,直接造成位置控制伺服系统精度差,响应速度低下。针对此问题,提出在活塞杆密封处采用双圆锥静压轴承,并且加装迷宫封油边的方式降低密封摩擦力,进而提高液压缸的低速稳定性,并且采用CFD数值模拟和AMESim仿真对其作了分析和验证。

    Abstract:

    Stickslip motion phenomenon usually appears in the servocylinder with using of traditional contact seal because of the friction and the sizable difference characteristics between dynamic friction and static friction. The lower of the accuracy and response speed of the position servosystem was caused directly. Aimed at this problem, it was proposed to use the double conical hydrostatic bearing and added labyrinth seal as the rod seal to lower the friction of servocylinder, and to improve the low speed stability of hydraulic cylinder. It is verified and analyzed by using CFD numerical simulation and AMESim simulation.

    参考文献
    相似文献
    引证文献
引用本文

吴晓明,赵子良,郑树伟,姜昊宇.活塞杆非接触密封在伺服液压缸中的应用及其对[J].机床与液压,2015,43(13):71-74.
. Use of Noncontact Seal in Servo Cylinder and Its Influence on Low Speed Stability of Hydraulic System[J]. Machine Tool & Hydraulics,2015,43(13):71-74

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-11-24
  • 出版日期: