欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
剪刀架举升机构统一输入力计算与仿真比较研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Comparison Study of Simulation and Calculation of Unified Input Force of Scissor Lifting Mechanisms
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    剪刀单元是众多机构的基本组成单元,应用广泛。针对不同输入配置的单节式剪刀架举升机构(剪升机构),其输入力分析是设计工作的首要步骤。对全部不同输入构型的单节剪刀架举升机构进行仿真建模。在统一输入力公式基础上,提出机构输入力变化判别式。通过理论分析与仿真结果的对比,可以验证所研究方法的正确性。

    Abstract:

    Scissors unit is the basic compositng unit of many mechanisms with wide range of application. Aimed at different input configurations of single group of scissor lift mechanism (SLM), calculation of input force is the first step of design work. Simulation models of all different SLM configuarations were built. Based on a unified equation of input force, a determiation method was proposed to decide regulation of input force variation of SLM. Through comparing simulation result with theoretical analysis, the study method is validated to be correct.

    参考文献
    相似文献
    引证文献
引用本文

张威,张雪飞,刘兵飞,王立文.剪刀架举升机构统一输入力计算与仿真比较研究[J].机床与液压,2015,43(15):91-93.
. Comparison Study of Simulation and Calculation of Unified Input Force of Scissor Lifting Mechanisms[J]. Machine Tool & Hydraulics,2015,43(15):91-93

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-11-24
  • 出版日期: