欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
铣头式加工中心自动松拉刀实验装置的结构设计
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家科技重大专项(高档数控机床与基础制造装备)(2013ZX0400-1061)


Design of Experimental Device for the Automatic Clamping and Releasing Tool System in Millinghead Machining Center
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    自动松拉刀系统是五轴联动加工中心铣头的关键部件,为了验证所设计的自动松拉刀系统的基本功能、在静态条件下是否会出现漏液及使用寿命等情况,通过分析自动松拉刀的工作原理,确定了自动松拉刀系统实验装置液压试验台的设计方案,设计了一个液压试验台来模拟其在静态时的功能实现。

    Abstract:

    The automatic clamping and releasing tool system is the key part in milling head of fiveaxis linkage machining center. The experimental device was designed in order to verify the system basic function and the working life. The principle was analyzed and the design scheme was determined. The hydraulic experimental device can simulate the motion and function of the automatic clamping and releasing system in machining center. The system life can be gotten depending on the time of the experiment device. 

    参考文献
    相似文献
    引证文献
引用本文

陈秀梅.铣头式加工中心自动松拉刀实验装置的结构设计[J].机床与液压,2015,43(16):5-6.
. Design of Experimental Device for the Automatic Clamping and Releasing Tool System in Millinghead Machining Center[J]. Machine Tool & Hydraulics,2015,43(16):5-6

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-11-24
  • 出版日期: