欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
以数控车床为本体的液压实验台设计与实现
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

徐州生物工程职业技术学院科研课题资助项目(2012B01)


Design and Implementation of Hydraulic Experiment Platform Based on CNC Lathe
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    设计一台液压实验台,以带有液压卡盘夹紧系统的数控车床为本体,利用液压站的动力驱动尾座,并统一用PLC控制液压卡盘及液压尾座的运动。为了方便学生开展液压实验,特别是机电液的联调实验,将PLC、节流阀、压力表等部件整合到单独的操作台上。此设计在保证液压卡盘夹紧系统正常工作的前提下,挖掘了设备的潜力,拓展了其功能,并且将液压实验与数控设备相结合的思路亦可供同行参考。

    Abstract:

    Taking the CNC lathe with hydraulic chuck clamping system as body,a hydraulic experimental platform was designed, using hydraulic station power to drive the tailstock,and using PLC to control the movement of hydraulic clamping and hydraulic tailstock. In order to facilitate the students to carry out hydraulic experiment, especially the alignment experiment of mechanical electrical and hydraulic, PLC, throttle valve, pressure gauge etc were integrated into a single work station. Under the premise of ensuring hydraulic chuck clamping system normal work, this design digs up the potential of the equipment, expands its function, and the idea that hydraulic experiment combining with CNC lathe provides reference in the peer.

    参考文献
    相似文献
    引证文献
引用本文

杨建国.以数控车床为本体的液压实验台设计与实现[J].机床与液压,2015,43(16):119-122.
. Design and Implementation of Hydraulic Experiment Platform Based on CNC Lathe[J]. Machine Tool & Hydraulics,2015,43(16):119-122

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-11-24
  • 出版日期: