欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
一种快速的变螺旋铣刀铣削稳定性预测方法
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

河南省高等学校重点科研项目(15A210038);河南农业大学科技创新基金资助项目(KJCX2015A07);机电工程学院拔尖人才创新创业训练项目(2014JDCX17);天津市应用基础与前沿技术研究计划(15JCQNJC05000)


A Fast Solution for Efficiently Predicting Stability of Variable Helix Cutters Milling
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    变螺旋铣刀铣削作为一种有效的颤振控制策略,已经受到了广泛关注。由于在建立的变螺旋铣刀铣削动力学方程中,出现了由铣刀变螺旋特性引发的系统变时滞相,而现有方法无法求解该问题。针对该问题,提出了对刀具进行轴向离散,而后将每个离散后的变螺旋刀具单元,近似模拟成变齿距刀具,从而完成变时滞微分方程向多时滞微分方程的转化。通过与前人研究工作作比较以及模型验证与分析可知,所提出的方法具有良好的预测变螺旋铣刀铣削稳定性的能力,更高的计算精度、收敛效率和计算效率。

    Abstract:

    The utilization of variable helix cutters was an effective means to prevent chatter vibration during milling. Due to the cutting dynamics equation of variable helix cutter, the delay phase was caused by milling variable helical characteristics, and the existing methods can not solve this problem. A way of tool axial dispersion was presented, and then each discrete unit of the variable helix cutter was approximately simulated variable pitch cutter. Thus variable delay differential equations were transferred to multi delay differential equation, which could solve the above problem. Comparing with the previous research work, the proposed method has a better predictive ability of variable helix milling stability, and higher precision, convergence and computational efficiency.

    参考文献
    相似文献
    引证文献
引用本文

张开飞,靳刚,余泳昌,王万章,李赫,薛妍妍.一种快速的变螺旋铣刀铣削稳定性预测方法[J].机床与液压,2015,43(23):83-85.
. A Fast Solution for Efficiently Predicting Stability of Variable Helix Cutters Milling[J]. Machine Tool & Hydraulics,2015,43(23):83-85

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-01-08
  • 出版日期: