欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
基于AMESim的防突钻机液压系统动态仿真分析
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Dynamic Simulation Analysis on Rotating Hydraulic System of Rigs Based on AMESim
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    分析全液压防突钻机回转液压系统的工作原理,利用AMESim软件建立其仿真模型,并进行动态仿真分析,得到了不同负载下马达进口压力变化曲线,并通过现场模拟试验验证了仿真结果的正确性;对影响系统动态特性的因素进行分析,得到不同等效黏性阻尼系数的情况下马达输出转速和进口压力的响应曲线。试验和仿真结果表明,该回转液压系统具有良好的动态特性以及很强的负载适应性。

    Abstract:

    The working principle of the rotating hydraulic system of full hydraulic rigs against outburst was analyzed. The simulation model was built through AMESim and the dynamic simulation analysis was completed.Then the motor inlet pressure response curves under different load were gained,and the simulation results’ correctness was validated through site test.The motor output speed curves and inlet pressure under different equivalent viscosity damping coefficients were gotten through the analysis of the system′s dynamic property.The test and simulation results show that the hydraulic system under different loads has better dynamic characteristics and strong load adaptability.

    参考文献
    相似文献
    引证文献
引用本文

滕长江,胡正伟,李戈,李辉.基于AMESim的防突钻机液压系统动态仿真分析[J].机床与液压,2015,43(20):98-100.
. Dynamic Simulation Analysis on Rotating Hydraulic System of Rigs Based on AMESim[J]. Machine Tool & Hydraulics,2015,43(20):98-100

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-01-08
  • 出版日期: