欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
空压机气阀阀盖的加工工艺研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Research on Processing Technology of Air Compressor Valve Cover
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    对于空压机气阀阀盖锥形圆弧槽的加工,如采用传统加工工艺,则选用的刀具直径小,加工效率低,生产成本高,表面质量差。改进加工工艺和方法,采用专用的锥形立铣刀加工,加工效率提高30%,刀具成本降低70%,表面质量也有了较大提高,为同类零件的加工工艺的制定提供一定的参考。

    Abstract:

    In view of the tapered circular groove processing of air compressor air valve cover, if the traditional processing technology is used, the selected cutter diameter is small, processing efficiency is low, production cost is high, and the surface quality is poor. By improving the processing technology and method, and using special tapered endmill processing, machining efficiency was increased by 30%, and the tooling cost was reduced by 70%. The surface quality was improved greatly. It provides reference for the setting of processing technology of similar parts.

    参考文献
    相似文献
    引证文献
引用本文

张荣高.空压机气阀阀盖的加工工艺研究[J].机床与液压,2015,43(20):75-77.
. Research on Processing Technology of Air Compressor Valve Cover[J]. Machine Tool & Hydraulics,2015,43(20):75-77

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-01-08
  • 出版日期: