Aiming at the problem of nonlinear motion loading in the finite element analysis of numercial control (NC) incremental forming, a method for the extraction of the points on the NC incremental forming path based on NC code was presented. Firstly, the file of NC code was read by the VC++ programming to identify the form of tool path interpolation in NC code; then, according to the interpolation types of linear and circular, the tool paths were discretized into the swarm of points according to the given accuracy, and the point coordinates together with the given time were stored separately in the text file format that could be read into the finite element analysis (FEA) software. The case studies based on ANSYS/LSDYNA indicate that the acquisition points on the forming path which finite element FEA required from the NC code by using this method can ensure FEA simulation of the NC incremental forming to be conducted stablely and reliablely. 