欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
特型柱销加工工艺及夹具设计
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Special Dowel Pin Processing Technology and Fixture Design
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    分析了零件特征和尺寸,阐述加工的难点是由直径20 mm半圆柱面和半径R10 mm半圆柱面构成的组合圆柱面,为此拟定了可行的加工方案,设计了简易的夹具,在车床上加工完成,保证了加工质量和加工效率。

    Abstract:

    The characteristics and size of the part were analyzed. The processing difficulty was the combinatory cylinder composed by 20 mm halfcylinder and R10 mm halfcylinder. Therefore, a feasible processing scheme was proposed and a simple jig was designed.The processing was completed on a lathe and the machining quality and efficiency were ensured.

    参考文献
    相似文献
    引证文献
引用本文

教传艳,吴敬.特型柱销加工工艺及夹具设计[J].机床与液压,2016,44(2):62-63.
. Special Dowel Pin Processing Technology and Fixture Design[J]. Machine Tool & Hydraulics,2016,44(2):62-63

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-04-07
  • 出版日期: