欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
小波包分解与单节点重构改进算法在轧辊偏心补偿中的应用
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家高技术专项项目(2005-1)


Application of Wavelet Packet Decomposition and Singlenode Reconstruction 〖JZ〗Improved Algorithm for the Roll Eccentricity Compensation Control
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对小波包算法在从复杂的轧制力信号中提取轧辊偏心信号时的频率混淆问题,提出了一种小波包分解与单节点重构改进算法的偏心信号提取新方法,并将其应用到轧辊偏心的补偿中。仿真结果表明:该算法能够有效地提取并重构轧辊偏心信号模型,对轧辊偏心的控制效果明显。

    Abstract:

    Wavelet packet method have some frequency alias problems at the complicated roller eccentricity signal extraction.A new roll eccentricity signal extraction method was presented,which was the roller eccentricity signal extraction based on wavelet packet decomposition and improved single node reconstruction algorithm,and to applicate to the eccentricity signal compensation control.The simulation results show that the new method is effective,and this method can accurately extract and reconstruct the eccentric model,and the eccentricity compensation control effect is obvious.

    参考文献
    相似文献
    引证文献
引用本文

李仲德,徐翔宇,崔桂梅,李爱莲.小波包分解与单节点重构改进算法在轧辊偏心补偿中的应用[J].机床与液压,2016,44(5):47-50.
. Application of Wavelet Packet Decomposition and Singlenode Reconstruction 〖JZ〗Improved Algorithm for the Roll Eccentricity Compensation Control[J]. Machine Tool & Hydraulics,2016,44(5):47-50

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-05-05
  • 出版日期: