欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
PLC和触摸屏在龙门式液压机组控制系统中的应用
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Application of PLC and Touch Screen in the Control System for the Gantry Hydraulic Press
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    根据球罐弧形板片成形冲压工艺要求,构建了龙门式液压机组控制系统主站PLC与远程站ET200S和工业监控设定触摸屏HMITECH TPC-150TC之间的网络架构,设计了主站PLC与触摸屏的软件程序,重点阐述了主泵电机软起动和数据处理与整定程序设计过程,同时对触摸屏画面组态设计进行说明。系统主站PLC通过对现场数据的采集分析处理,实现了压机快下、加压、停止、回程、快回控制执行功能。经现场调试与实际应用,程序各功能块运行准确,能完成预期的控制功能。

    Abstract:

    According to the forming processing requirements of arc plate,the network construction among the master PLC and the remote station ET200S and touch screen HMITECH TPC150TC in the hydraulic press control system was built. The master PLC and touch screen software programs were designed, focusing on the main pump motor soft start and data processing and setting, while the touch screen configuration was explained. Through onsite master PLC acquiring and analyzing data,the control executive functions of press down, pressure, stopped , return ,fast back were achieved. After debugging and application, each functional block runs exactly, the expected function can be completed.

    参考文献
    相似文献
    引证文献
引用本文

冯作全,王宇翔,马永安. PLC和触摸屏在龙门式液压机组控制系统中的应用[J].机床与液压,2016,44(8):134-136.
. Application of PLC and Touch Screen in the Control System for the Gantry Hydraulic Press[J]. Machine Tool & Hydraulics,2016,44(8):134-136

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-05-05
  • 出版日期: