欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
基于实际工况的装配体公差建模方法研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51365009);广西制造系统与先进制造技术重点实验室主任课题(13-051-09-009Z);桂林电子科技大学研究生教育创新计划资助项目(YJCXS201501)


Research of Assembly Tolerance Modeling Method Based on Actual Working Condition
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    几何产品的装配公差数学模型对CAD/CAM/CAE的集成有着重要的作用。目前的装配公差模型以刚体假设为前提,忽视了实际工况的影响。为解决此问题,研究了实际工况对产品工作性能及公差设计的影响,利用有限元仿真计算了零件在实际工况下的变形量,并在公差模型中综合考虑变形量的影响,建立了实际工况下装配体的公差模型。将该方法应用到尾座装配体的公差建模中,验证了该方法的有效性。 

    Abstract:

    The assembly tolerance mathematical model of geometric product is of great importance in computer aided design/computer aided manufacture/computer aided engineering (CAD/CAM/CAE) integration. Present assembly tolerance model is on the premise of rigid body assumption, and the influence of the actual working condition is ignored. In order to solve this problem, the impact of actual working condition on the product performances and tolerance design was researched. By using the finite element simulation, part deformations under working load were calculated. And the influence of the actual working condition in the tolerance model was also considered comprehensively. Finally, the assembly tolerance model under the actual working condition was established. This method was applied to a tailstock assembly tolerance modeling. The effectiveness of the proposed method is verified.

    参考文献
    相似文献
    引证文献
引用本文

程彬彬,黄美发,王志越,冯建国,吴常林.基于实际工况的装配体公差建模方法研究[J].机床与液压,2016,44(7):116-120.
. Research of Assembly Tolerance Modeling Method Based on Actual Working Condition[J]. Machine Tool & Hydraulics,2016,44(7):116-120

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-05-05
  • 出版日期: