欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
犁削挤压角对切削性能影响的模拟研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金项目(51075218);黑龙江省留学归国人员科学基金项目(LC2015016);齐齐哈尔市工业攻关项目(GYGG-201505);齐齐哈尔市工业攻关项目(GYGG201614)


Simulation Research on Influence of Ploughingextrusion Angle on Cutting Performance
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    将直径为6 mm的微型铜管简化为厚度0.4 mm的铜板,应用DEFORM-3D软件对微沟槽犁削-挤压成形过程进行模拟,在模拟过程中只有刀具挤压角单一参数变化(45°、60°、90°),通过分析在3种不同挤压角刀具成形下的铜板翅结构、应力和应变分布图,得出60°挤压角刀具犁削-挤压切削效果最佳。

    Abstract:

    6 mm-diameter micro copper tube is simplified as 0.4 mm-thickness copper plate. The DEFORM-3D software was used to simulate forming process of micro grooves using ploughing-extrusion. During the simulation, the only parametric variation was extrusion angle (45°, 60°, 90°). Cutting tool with 60°extrusion angle has the best cutting effect by analyzing copper fin structure and stress and strain distribution of three different situation.

    参考文献
    相似文献
    引证文献
引用本文

李明,李西兵,郭建华,包丽,张学元,艾丽昆.犁削挤压角对切削性能影响的模拟研究[J].机床与液压,2017,45(15):150-154.
. Simulation Research on Influence of Ploughingextrusion Angle on Cutting Performance[J]. Machine Tool & Hydraulics,2017,45(15):150-154

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2018-03-02
  • 出版日期: