欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
小型排刀车床动力刀座的精度修正
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

2015年陕西省教育厅项目(15JK1380);2015年校级自选课题(14XL-2L001)


Small Gang Tool Lathe Power Holder Accuracy Correction
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对某型动力刀座装配结构,对它在工作过程中出现的发热现象和精度超差原因进行理论分析,得出主轴和轴承配合间隙超差、前后轴承偏心、隔套高度一致性差是导致跳动精度超差及设备发热的主要原因。并提出了具体调整措施,有效提高了动力刀座精度。

    Abstract:

    Aiming at a certain type of power tool holder structure, its heating phenomenon and precision tolerance reasons in the course of their work were theoretically analyzed.It was shown that out of tolerance of the gap between the spindle and the bearing, the front and rear bearing eccentric,poor height consistency of the spacers were the main causes. Concrete adjustment measures were put forward to effectively improve the accuracy of the driven tools.

    参考文献
    相似文献
    引证文献
引用本文

武欣竹,杨继盛.小型排刀车床动力刀座的精度修正[J].机床与液压,2017,45(16):197-198.
. Small Gang Tool Lathe Power Holder Accuracy Correction[J]. Machine Tool & Hydraulics,2017,45(16):197-198

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2018-03-08
  • 出版日期: