欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
FDM工艺精度分析与试验研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

山东省科技重大专项(2015ZDXX0601C01);山东省高等学校科技计划(J17KA018)


Precision Analysis and Experimental Investigations of Fused Deposition Molding Technology
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    熔融沉积成型技术的不断发展受到了各行各业的关注,在快速成型过程中的每一环节都会产生误差,这严重影响了产品的精度。通过对熔融沉积工艺流程进行介绍,分析了影响产品精度的多个因素并提出相应的解决方法。进一步将影响快速成型精度的喷头温度、扫描速度、分层厚度3个因素进行试验分析,得到了影响精度的主要因素,并结合实际经验进行对比分析,得出相关结论。对进一步研究熔融沉积成型技术工艺以及提高成型件的精度具有参考意义。

    Abstract:

    The continuous development of fused deposition modeling (FDM) technology has been concerned in every profession. Each step will generate an error in the rapid prototyping process, which seriously affects the precision of the product. Through the introduction of the FDM technological process, several factors affecting the precision of the product are analyzed and the corresponding solutions are put forward. Further, the influence of three factors which were the nozzle temperature, the scanning speed and the layer thickness were tested and analyzed. Then the main factors influencing the precision were achieved. And the relevant conclusions were obtained by combined with the practical experience of the comparative analysis. This will have a reference value to further investigate the FDM rapid prototyping technological process and improve the precision of the forming part.

    参考文献
    相似文献
    引证文献
引用本文

韩善灵,亓涛,李志勇,徐海港. FDM工艺精度分析与试验研究[J].机床与液压,2017,45(23):90-94.
. Precision Analysis and Experimental Investigations of Fused Deposition Molding Technology[J]. Machine Tool & Hydraulics,2017,45(23):90-94

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2018-04-11
  • 出版日期: