欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
能量回收液压泵试验台仿真分析
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

山西省国际合作项目 (2013081032)


Simulation Analysis of Hydraulic Pump Test-bed for Energy Recovery
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    传统液压泵试验台消耗能量较多,并且为了模拟负载,由节流口加压,高压油直接流回油箱,造成大量的能量浪费。通过对试验台回路重新设计,回收被试泵高压油与供油泵共同驱动液压马达,由液压马达来带动被试泵,实现能量的回收利用。通过利用SimulationX对新回路进行仿真分析,在保持试验泵原有工况下,对泵进行性能测试,节能在67%以上。

    Abstract:

    Traditional hydraulic pump test-bed consumed more energy, and in order to simulate the load, pressurized by the throttle opening, high pressure oil flows back to the tank, resulting in a lot of energy is wasted. Through the test-bed circuit redesign and recovery test pump high pressure oil and the oil pump to drive hydraulic motor together, by a hydraulic motor to drive the pump, the recovery of energy utilization was realized. By using simulationX to simulate and analyze the new circuit, the performance test of the pump was carried out under the condition of keeping the original working condition of the test pump. The energy saving is more than 67%.

    参考文献
    相似文献
    引证文献
引用本文

耿亚杰,杨敬,郭继保,权龙.能量回收液压泵试验台仿真分析[J].机床与液压,2018,46(3):147-149.
. Simulation Analysis of Hydraulic Pump Test-bed for Energy Recovery[J]. Machine Tool & Hydraulics,2018,46(3):147-149

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2018-05-02
  • 出版日期: