文章摘要
肖善华.叶轮高速开粗加工路径优化设置研究[J].机床与液压,2018,46(2):49-53.
.Research on Impeller High-speed Roughing Machining Path Optimization Setting[J].Machine Tool & Hydraulics,2018,46(2):49-53
叶轮高速开粗加工路径优化设置研究
Research on Impeller High-speed Roughing Machining Path Optimization Setting
  
DOI:10.3969/j.issn.1001-3881.2018.02.014
中文关键词: MasterCAM X6软件  叶轮专家系统  叶轮粗加工
英文关键词: MasterCAM X6 software  Impeller expert system  Impeller rough machining
基金项目:
作者单位E-mail
肖善华 宜宾职业技术学院 yb_99888@163.com 
摘要点击次数: 589
全文下载次数: 0
中文摘要:
      分析叶轮五轴数控加工刀具路径优化及NURBS曲面优化算法,应用MasterCAM X6软件中的叶轮专家系统,完成叶轮的高速五轴开粗加工优化参数设置,模拟仿真得到无碰撞、无过切的五轴叶轮开粗刀路轨迹。经实际切削验证,得到开粗的叶轮。
英文摘要:
      Five-axis NC machining path optimization of impeller and the NURBS surface optimization algorithm were analyzed.The expert system in MasterCAM X6 software was applied to complete high-speed five-axis rough machining optimized parameter setting.No collision, no past five axial impeller rough machining path trajectory was gotten.By the actual cutting, a coarse impeller was gotten.
查看全文   查看/发表评论  下载PDF阅读器
关闭

分享按钮