欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
基于HNC-8数控系统的机床热误差补偿方法
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

湖北省科技重大专项项目(2014AAA007);2016年湖北省机电学科群开放基金(XKQ2016002)


Thermal Error Compensation Method for Machine Tool Based on HNC-8 System
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    热误差在机床总误差源中占了极大比重,研究热误差补偿方法对于提高机床加工精度具有十分重要的意义。基于HNC-8(华中8型)数控系统的开放性特性,根据机床热误差的补偿原理,分析热误差补偿值的计算方法,并据此算法开发了集成于HNC-8数控系统的热误差补偿模块,最后结合实例,验证了补偿方法的有效性。

    Abstract:

    Thermal error accounts for a great proportion in the machine’s total error sources. Research on thermal error compensation method for improving machining accuracy is of great importance. Based on the open feature of HNC-8 system, according to the principle of thermal error compensation, the calculation method of thermal error compensation value was analyzed. Then the interpolation algorithm of thermal error compensation was realized. According to this algorithm, the thermal error compensation module integrated in HNC-8 system was developed. Finally a case analysis was introduced to verify whether the model and method is effective and feasible.

    参考文献
    相似文献
    引证文献
引用本文

陈国华,闫茂松,向华,李强,张少博,童光庆.基于HNC-8数控系统的机床热误差补偿方法[J].机床与液压,2018,46(2):21-24.
. Thermal Error Compensation Method for Machine Tool Based on HNC-8 System[J]. Machine Tool & Hydraulics,2018,46(2):21-24

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2018-04-16
  • 出版日期: