欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
液压挖掘机负载敏感液压系统能耗特性研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

江西省科技支撑项目(20142BBE50057);江西省教育厅科技项目(GJJ14558)


Energy Consumption Characteristics of the Load-sensing Hydraulic System of Excavator
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    负载敏感系统具有良好的多执行器并行控制特性和高的能量效率,被广泛应用于中小型工程装备和工业设备中。目前主要有阀前补偿系统和抗流量饱和阀后补偿系统两种。为了更好地研究负载敏感工作特性和能量效率,在详细对比分析这两种系统的结构和工作原理的基础上,对其进行建模,研究在单执行器和多执行器复合动作时系统的工作特性和能量效率,为系统的选用和设计提供参考。研究表明:阀后补偿系统多路阀结构紧凑,负载补偿阀兼具梭阀作用,不用专门布置梭阀网络,但是由于阀芯上节流控制段和换向段分开,系统能耗相对较大。

    Abstract:

    Due to the good performance in the multi-actuators system driven by single pump and high energy efficiency,the load-sensing system is widely applied in small and medium sized engineering equipment and industrial equipment.At present,there are two main types of compensation system,which are the pre-compensation system and the post compensation system.In order to have a knowledge of the working performance and energy efficiency about the load-sensing system,the simulation models of these two system were built based on the detail structure.The research focused on the difference of these two systems when single actuator and more than one working simultaneously.The results show that the structure of the valve used in the post compensation system is more impact.And there is no required about shuttle valve network.However,the energy efficiency of the post compensation system is poor than the pre-compensation system.

    参考文献
    相似文献
    引证文献
引用本文

陈莛,孟令新,崔爽.液压挖掘机负载敏感液压系统能耗特性研究[J].机床与液压,2018,46(4):79-83.
. Energy Consumption Characteristics of the Load-sensing Hydraulic System of Excavator[J]. Machine Tool & Hydraulics,2018,46(4):79-83

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2018-05-09
  • 出版日期: