欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
基于正交试验的6061铝合金铣削工艺研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Study of Milling Process for 6061 Aluminum Alloy Based on Orthogonal Experiment
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    建立铣削参数中主轴转速、进给速度、切削深度对6061铝合金铣削粗糙度影响的单因素试验方案,通过绘制铣削单因素对表面粗糙度的影响趋势曲线,分析各因素对粗糙度的影响规律及成因;再通过正交试验的极差、方差分析3个因素对6061铝合金表面粗糙度影响的强弱关系,最终确定粗糙度最优的因素组合。

    Abstract:

    The experiment was carried out on 6061 aluminum alloy part by using single factor method to study the milling surface roughness,and the effects trend curve of milling parameters on surface roughness were drawn.The influence law and causes of the influence factors on roughness were analyzed.The influence of the three factors on the surface roughness of 6061 aluminum alloy was analyzed by using range and variance analysis of the orthogonal experiment.Final,best combination of the factors was determined.

    参考文献
    相似文献
    引证文献
引用本文

伍文进,徐中云,严帅,张磊.基于正交试验的6061铝合金铣削工艺研究[J].机床与液压,2018,46(14):27-30.
. Study of Milling Process for 6061 Aluminum Alloy Based on Orthogonal Experiment[J]. Machine Tool & Hydraulics,2018,46(14):27-30

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2019-07-04
  • 出版日期: