欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
基于ADAMS和ANSYS工业机器人运动仿真与有限元分析
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(11502098);江苏省高校自然科学研究面上项目(15KJB130003);江苏省大学生创新创业训练计划项目(201613991002Y)


Motion Simulation and Finite Element Analysis of Industrial Robot Based on ADAMS and ANSYS
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以一种六自由度工业机器人为研究对象,对其在真实抓取过程中的运动进行有限元分析。采用Pro/E对六自由度工业机器人进行三维建模,将模型导入ANSYS Workbench中,对工业机器人极限位置处的大臂进行有限元静态分析。在ADAMS中工业机器人模拟抓取过程,将结果导入Workbench进行瞬态动力学分析。ADAMS和ANSYS相结合模拟真实运动情况的方法,使校核结果更加的真实、可靠,同时有效验证了设计的合理性。

    Abstract:

    A six degree of freedom industrial robot was taken as the research object to conduct finite element analysis of its motion during the real grasping process. Firstly, the six degree of freedom industrial robot was modelled by Pro/E,and then the model was imported in ANSYS Workbench ,so as to conduct finite element static analysis of the large arm at the extreme position of the industrial robot. Secondly, the results of simulation during the grasping process of industrial robot in ADAMS was imported into the Workbench for transient dynamics analysis.The method of ADAMS and ANSYS combined to simulate the real motion makes the results more accurate and reliable, and verifies the rationality of the design effectively.

    参考文献
    相似文献
    引证文献
引用本文

徐建飞,范纪华,任亮,方海峰,王琪,吴群彪.基于ADAMS和ANSYS工业机器人运动仿真与有限元分析[J].机床与液压,2018,46(15):24-27.
. Motion Simulation and Finite Element Analysis of Industrial Robot Based on ADAMS and ANSYS[J]. Machine Tool & Hydraulics,2018,46(15):24-27

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2019-07-04
  • 出版日期: