文章摘要
罗豪,周奇,吴超群,刘辉.坐标系在机器人自动打磨设备中的应用[J].机床与液压,2018,46(15):80-83.
.Application of Coordinate System in Robotic Automatic Polishing Equipment[J].Machine Tool & Hydraulics,2018,46(15):80-83
坐标系在机器人自动打磨设备中的应用
Application of Coordinate System in Robotic Automatic Polishing Equipment
  
DOI:10.3969/j.issn.1001-3881.2018.15.019
中文关键词: RobotStudio  坐标系  自动打磨  磨损补偿
英文关键词: RobotStudio  Coordinate system  Automatic polishing  Wear compensation
基金项目:
作者单位E-mail
罗豪 武汉理工大学机电工程学院 97656347@qq.com 
周奇 武汉理工大学机电工程学院  
吴超群 武汉理工大学机电工程学院  
刘辉 武汉理工大学机电工程学院  
摘要点击次数: 350
全文下载次数: 0
中文摘要:
      机器人打磨因改善工人作业环境且打磨质量高受到越来越多的关注,这对机器人的运动路径规划提出了较高的要求。正确认识和灵活运用坐标系能极大地方便编程和调试工作。以实际工程项目为例,介绍了机器人的坐标系统,针对性地分析了机器人打磨工艺流程,详细说明了各坐标系在不同铸件打磨阶段中的应用,实现了高效轨迹编程与刀具的磨损补偿。
英文摘要:
      For improving the working environment and polishing quality, the robotic polishing has received more and more attention, which puts forward higher requirement for the motion path planning. Correct understanding and flexible using of coordinate system can bring great convenience to the programming and debugging. Based on a practical engineering project, the robotic coordinate system was described and the polishing process of robot was analyzed specifically, and the application of each coordinate system in different grinding phases was explained in detailed , which implemented the efficiency of trajectory programming and compensation of tool wear.
查看全文   查看/发表评论  下载PDF阅读器
关闭

分享按钮