文章摘要
常浩捷,陈锦江,王泽民,王哲,陈雄伟.自润滑关节轴承温度场的有限元分析[J].机床与液压,2018,46(21):164-168.
.The FEA about Temperature Field of Self lubricating Spherical Plain Bearings[J].Machine Tool & Hydraulics,2018,46(21):164-168
自润滑关节轴承温度场的有限元分析
The FEA about Temperature Field of Self lubricating Spherical Plain Bearings
  
DOI:10.3969/j.issn.1001-3881.2018.21.036
中文关键词: 自润滑关节轴承  摩擦热  有限元分析  温度场
英文关键词: Self lubricating spherical plain bearing  Friction heat  Finite element analysis  Temperature field
基金项目:
作者单位E-mail
常浩捷 燕山大学机械工程学院 chjc212@163.com 
陈锦江   
王泽民   
王哲   
陈雄伟   
摘要点击次数: 212
全文下载次数: 0
中文摘要:
      根据GE30C型自润滑关节轴承的实际结构与工况,用软件ANSYS Workbench分别建立了它在径向受载情况下作倾斜摆动和旋转摆动的有限元模型,对其温度场进行分析并得出温度的分布规律;采用正交试验法分析倾斜摆动时径向载荷、最大摆角、摆动周期和摩擦因数等对衬垫摩擦生热的影响规律,为该类轴承的合理选择与使用提供参考。
英文摘要:
      According to the actual structure and working conditions of self lubricating spherical plain bearings GE30C, finite element simulation was done during its tilt motion and swivel motion under radial load by ANSYS Workbench, the temperature field was analyzed and the distribution law of temperature was obtained. During tilt motion, the influenced law of radial load, maximum swing angle, swing cycle and frictional coefficient on frictional heat to liner was analyzed by orthogonal test.It provides reference for the rational selection and use of such bearings.
查看全文   查看/发表评论  下载PDF阅读器
关闭

分享按钮