欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
CNC多轴联动的机床交叉耦合轮廓误差补偿技术
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家科技重大专项(2014ZX040001-181);国家自然科学基金资助项目(51165024)


Research on Crosscoupled Contour Error Compensation Technology of CNC Machine Tool with Multi Axis Linkage
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了提高多轴联动CNC机床的加工精度,减小由机械传动及电气控制等因素造成的轮廓误差,针对多轴联动CNC机床伺服采用交叉耦合参数选择困难及稳定不强等问题,提出一种交叉耦合轮廓补偿的控制方法,建立交叉耦合轮廓误差补偿的模型,搭建了x轴、y轴及z轴仿真实验平台。仿真实验结果表明:轮廓误差补偿的算法使用交叉耦合误差补偿算法进行控制,可以大大降低轮廓误差。

    Abstract:

    In order to improve the machining precision of multi axis CNC machine tool,decrease contour error by mechanical transmission and electric control factors,aiming at the difficulties and instability of crosscoupled parameter selection in multi axis CNC machine tool servo,a kind of cross coupled contour error compensation control method was put forward,cross coupled contour error compensating model was established,and the x axis and y axis and z axis simulation experiment platform was set up.Simulation results show that the contour error compensation algorithm is controlled by cross coupled error compensation algorithm,which can greatly reduce the contour error.

    参考文献
    相似文献
    引证文献
引用本文

张万军,张峰,张景轩,张景怡,张景妍,张万良. CNC多轴联动的机床交叉耦合轮廓误差补偿技术[J].机床与液压,2019,47(2):1-5.
. Research on Crosscoupled Contour Error Compensation Technology of CNC Machine Tool with Multi Axis Linkage[J]. Machine Tool & Hydraulics,2019,47(2):1-5

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2019-07-16
  • 出版日期: