欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
脉冲数可控的步进电机S形驱动曲线实现方法研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

广东省科技计划资助项目(2013B010402015)


Investigations on a Variable Pulse S Drive Curves Method for Stepper Motor
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对传统步进电机S形驱动曲线脉冲频率固定的不足,提出基于STM32控制器的步进电机可变脉冲S形曲线驱动方法。通过实验验证,该方法可在保证S形驱动曲线完整输出的前提下,实时输出可变脉冲。同时,算法单次计算运行时间短,对控制器的性能要求较低,可以满足多轴驱动的要求,具备良好的实用性。

    Abstract:

    To solve the inconvenience of the stepper motor traditional fixedfrequency S drive curves,a new variable pulse S drive curves method was put forward based on STM32 microprocessor.According to the experiment data,this method can output a realtime intact S drive curves with the variable pulse,using only 1 ms per cycle on calculation,which can adapt to the multiaxis control system.

    参考文献
    相似文献
    引证文献
引用本文

邓志豪,肖曙红.脉冲数可控的步进电机S形驱动曲线实现方法研究[J].机床与液压,2019,47(2):149-152.
. Investigations on a Variable Pulse S Drive Curves Method for Stepper Motor[J]. Machine Tool & Hydraulics,2019,47(2):149-152

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2019-07-16
  • 出版日期: