欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
外圆磨削颤振监测方法设计
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

贵州省科学技术基金项目(黔科合LH字[2017]7350号);贵州省普通高等学校精密复合加工装备技术工程中心(黔教合KY字[2014]223)


Design of Chatter Detection in External Cylindrical Grinding
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    磨削颤振是影响加工质量和加工效率的重要因素,常需增加多个后续加工周期来满足加工质量的要求。采用涡流传感器、磨削力传感器、声发射传感器、加速度传感器和接触探头等多传感器对砂轮边沿的自激振荡进行测量,对自激振荡信号,提出采用幅值法和小波分析法进行分析处理,实现了磨削颤振的自动监测和预测,减少了加工周期,提高了加工效率。

    Abstract:

    Grinding chatter is an important factor affecting machining quality and machining efficiency. It is often necessary to add multiple subsequent processing cycles to meet the processing quality requirements. The selfexcited oscillation of the grinding wheel edge was measured by multisensors such as eddy current sensor, grinding force sensor, acoustic emission sensor, acceleration sensor and contact probe. The selfexcited oscillation signal was analyzed by amplitude method and wavelet analysis method. Automatic monitoring and prediction of grinding flutter is realized, which reduces the processing cycle and improves the processing efficiency.

    参考文献
    相似文献
    引证文献
引用本文

吕长飞,吴小玉,王茵,郑继明.外圆磨削颤振监测方法设计[J].机床与液压,2019,47(8):166-168.
. Design of Chatter Detection in External Cylindrical Grinding[J]. Machine Tool & Hydraulics,2019,47(8):166-168

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2020-01-19
  • 出版日期: