欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
基于FLUENT的槽型轨道清洗射流的参数优化仿真分析
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

广西重点实验室开放课题基金(1638012012k);珠海轨道交通健康运营协同创新中心项目;桂林电子科技大学研究生教育创新计划项目(2017YJCX06)


Simulation and Analysis of Parameter Optimization of Grooved Track Cleaning Jet Based on FLUENT
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    高压水射流作为一种绿色、高效的清洁技术,已经被广泛地应用于轨道清洁。为了获得高压水射流对槽型轨轨面的最佳清洗效果,利用计算流体动力学(CFD)分析软件FLUENT,对水射流的清洗过程进行了模拟仿真。依据仿真结果分析了轨道面的受力与水射流的流动情况,并对水射流的入射角与靶距进行了优化分析,最后得出在指定的条件下,射流的最佳靶距为10~15 cm,最佳入射角为25°。

    Abstract:

    High pressure water jet as a green, clean and efficient technology, has been widely used in track cleaning. In order to obtain the best cleaning effect of high pressure water jet on groove track surface, the computational fluid dynamics (CFD) analysis software FLUENT was used to simulate the process of water jet cleaning. According to the simulation results, the force of the track surface and the flow of water jet were analyzed, and the angle of incidence and the distance of the water jet were optimized. Finally, the optimum target distance of the jet is 10~15 cm and the best angle of incidence is 45 degrees under the specified condition.

    参考文献
    相似文献
    引证文献
引用本文

李海建,龙芋宏,谢勇君,唐文斌.基于FLUENT的槽型轨道清洗射流的参数优化仿真分析[J].机床与液压,2019,47(19):125-130.
. Simulation and Analysis of Parameter Optimization of Grooved Track Cleaning Jet Based on FLUENT[J]. Machine Tool & Hydraulics,2019,47(19):125-130

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2020-03-12
  • 出版日期: