欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
带有橡胶夹层的中心销套改制方法研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Study on the Reform Method of the Central Hash with Rubber Lamination
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对某种转向架枕梁中心销套在改制过程中因中间橡胶圈震动产生的质量问题,从加工设备、工装设计、刀具等方面研究加工方法,最终选择带内冷功能的立式加工中心设备,并设计制作了一套改制加工工装,用镗刀和坡口刀组合加工来解决问题,该方案在保证质量的同时大幅度提升了加工效率。因此基于工装设计的巧妙性和设备功能运用的灵活性等方式来解决加工难题的方法,值得参考。

    Abstract:

    In view of the quality problems caused by the vibration of the middle rubber ring in the reform process of the central 〖JP2〗pin of a bogie, the processing method was studied from the aspects of processing equipment, tooling design and cutting tools, and finally〖JP〗 the vertical machining center with inner cooling function was chosen.A set of fixture was designed, boring tool and groove knife were combinated to solve the above problem. This scheme can improve the processing efficiency while ensuring the quality, so the method of solving the processing difficulty based on the cleverness of tooling design and the flexibility of equipment function is worthy of reference.

    参考文献
    相似文献
    引证文献
引用本文

郑建科,王伟,杜宏光,陈文学,杨平杰.带有橡胶夹层的中心销套改制方法研究[J].机床与液压,2019,47(14):196-198.
. Study on the Reform Method of the Central Hash with Rubber Lamination[J]. Machine Tool & Hydraulics,2019,47(14):196-198

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2020-03-12
  • 出版日期: