欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
基于有限元的RV减速器关键结构分析
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

广东省科技计划重大专项(2017B090910007);华南理工大学广州学院机械制造及其自动化重点学科建设(52-CQ1700005)


Analysis of the RV Reducer Key Structure Based on Finite Element Method
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    RV减速器作为一种精密传动机构,掌握其关键零部件的受力与变形状态对整机的设计与制造十分重要。采用有限元方法分别计算了RV减速器关键零部件摆线针轮机构和偏心轴机构的应力和变形。计算结果表明:摆线针轮机构和偏心轴机构的接触应力和等效应力均远远小于相应材料的强度,这说明强度不是RV减速器零部件设计、制造过程中主要考虑的问题;偏心轴机构的刚度小于摆线针轮机构,对减速器整机的传动精度影响较大,对于摆线轮,则需根据变形情况合理选择修形方法和修形量,以提高刚度,从而提高减速器整机的传动精度

    Abstract:

    The Rotate Vector(RV) reducer is a precise transmission mechanism, to understand the stress and deformation state of key components are very important to design and manufacture the machine. The stress and deformation of key parts of the RV reducer were calculated by finite element method (FEM) respectively, including the stress and deformation of cycloidal-pin wheel and eccentric shaft. The results show that the structural contact stress and equivalent stress of cycloidal-pin wheel and eccentric shaft are far less than the strength of corresponding materials. It means that the strength is not the main consideration of problem in designing and manufacturing process. The stiffness of eccentric shaft mechanism is less than that of the cycloidal-pin wheel, which has a great influence on the transmission accuracy of the machine. In order to improve the rigidity so as to improve the transmission accuracy of gear reducer machine, the modification methods and modification quantity must be chosen properly to design by the deformation.

    参考文献
    相似文献
    引证文献
引用本文

梁顺可,宋雷,陈飞昕,邵明.基于有限元的RV减速器关键结构分析[J].机床与液压,2019,47(23):165-168.
. Analysis of the RV Reducer Key Structure Based on Finite Element Method[J]. Machine Tool & Hydraulics,2019,47(23):165-168

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2020-03-12
  • 出版日期: