欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
全自动线束端子插入机控制系统设计
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(61573233);广东省自然科学基金项目(2018A0303130188)


Fully Automatic Cables Terminals Inserting Machine Control System Design
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    全自动线束端子插入机的控制系统设计是一项复杂的软件工程项目。在分析插入机工作过程的基础上,构造控制系统的总体结构和功能模块,详细分析控制软件的3个核心模块:运动控制模块、品质监测模块和数据管理模块。在研制的全自动线束端子插入机样机上对控制系统进行了测试,结果表明:控制系统能满足设计要求,端子插入位置精度±0.1 mm,速度为1 800 pin/h。

    Abstract:

    The system software design for fully automatic wire terminals inserting machine is a very complicated software engineering project. On the basis of the analysis of basic working procedure of inserting machine,the software framework and function modules were introduced briefly and then the three important core modules:motion control module, quality monitor module and database management module, were analyzed carefully. Proved by the practical application of the prototype, the control system is successful with location precision is less than ±0.1 mm and production capacity is 1 800 pin per hour.

    参考文献
    相似文献
    引证文献
引用本文

吴晖辉,曾宪荣,梁铭峰,吴福培.全自动线束端子插入机控制系统设计[J].机床与液压,2020,48(8):90-93.
. Fully Automatic Cables Terminals Inserting Machine Control System Design[J]. Machine Tool & Hydraulics,2020,48(8):90-93

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2020-06-16
  • 出版日期: