欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
布浆器的纸浆适用性仿真分析
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金项目(11702148;11802117);江苏省高校自然科学研究面上项目(17KJD590001)


Simulation Analysis of Paper Pulp Applicability of a Pulp Distributor
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为研究布浆器结构对纸浆的适用性,基于Fluent仿真分析了3种不同纸浆在同一布浆器结构下的布浆均流效果,并分析了纸浆物性参数的影响。研究表明:水和3%质量分数的NBKP纸浆的喷浆效果接近,而5%质量分数的OCC纸浆则出现明显的误差增大;动力黏度是影响喷浆效果的主要因素,随着黏度的增加,喷浆误差呈先下降后上升的变化规律;基于经验公式设计出的布浆器具有纸浆适用局限性,对于动力黏度不超过0.1 Pa•s的低质量分数纸浆,其流量误差可控制在1.5%以内

    Abstract:

    In order to study the applicability of the pulp distributor structure to the paper pulp, the homogenization effect of three different paper pulps in the same distributor structure was analyzed based on Fluent simulation, and the effect of paper pulp physical parameters was analyzed. The results show that the distribution effect of water and 3% NBKP pulp is close, while the error of 5% OCC pulp is obviously increased; the dynamic viscosity is the main factor affecting the distribution effect, with the viscosity increasing , the distribution error decreases first and then increases; the pulp distributor designed based on the empirical formula has limitation in the applicability of paper pulp; the flow error rate can be controlled within 1.5% for low mass fraction paper pulp which dynamic viscosity not exceeds 0.1 Pa•s

    参考文献
    相似文献
    引证文献
引用本文

巩飞,郭鸿浩,王研艳.布浆器的纸浆适用性仿真分析[J].机床与液压,2020,48(15):156-160.
GONG Fei, GUO Honghao, WANG Yanyan. Simulation Analysis of Paper Pulp Applicability of a Pulp Distributor[J]. Machine Tool & Hydraulics,2020,48(15):156-160

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2021-09-02
  • 出版日期: