欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
高速电主轴轴承温度影响因素研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

“高档数控机床与基础制造装备”国家科技重大专项(2015ZX04001002)


Research on the Influence Factors of High Speed Spindle’〖KG-*2〗s Bearing Temperature
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    选取电主轴温升为研究对象,分别验证油气润滑系统与冷却系统的工作参数对高速电主轴工作性能的影响。采用单一因素实验法,通过电主轴实验平台对不同工况下电主轴后端轴承温升进行实验分析。结果表明:在冷却水流量为034 L/min、润滑压力为040 MPa、供油间隔为120 s时电主轴温升较小。

    Abstract:

    Taking the temperature rise of motorized spindle as research object, the influences of water cooling system and oil and gas lubrication system’〖KG-*2〗s working parameters on the working performance of highspeed motorized spindle were verified separately. The single factor experiment method was used in the experiment to analyze the rear bearing temperature rise of motorized spindle under different working conditions through the motorized spindle experimental platform.The experiment results show that the temperature is minimal when the cooling water flow rate is 034 L/min, the air pressure is 040 MPa and the oil supply intervals is 120 s.

    参考文献
    相似文献
    引证文献
引用本文

张锐扬,陈学振,龚飞,李连玉.高速电主轴轴承温度影响因素研究[J].机床与液压,2020,48(20):27-30.
ZHANG Ruiyang, CHEN Xuezhen, GONG Fei, LI Lianyu. Research on the Influence Factors of High Speed Spindle’〖KG-*2〗s Bearing Temperature[J]. Machine Tool & Hydraulics,2020,48(20):27-30

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2021-04-22
  • 出版日期: