欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
一种独立光伏发电系统双向变换器的控制
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

吉林省教育厅科学技术研究项目“电气工程—电力系统及自动化”


Control of a bi-directional converter for stand-alone photovoltaic generation system
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    光伏发电系统通过双向变换器引入储能环节进行控制,光伏电池发出的能量经DC-DC变换后供给直流母线侧负载,并通过双向变换器使用蓄电池进行能量管理。介绍了双向变换器的工作原理,分析了光伏电池、蓄电池和直流母线负载所消耗的能量处于不同状态时的系统能量管理策略。给出了基于Boost变换器的光伏电池最大功率跟踪的控制算法和基于双向变换器的蓄电池的充放电控制算法,提出了一种改进的充电控制策略。以Matlab/Simulink为仿真平台,搭建了该系统的仿真模型,并针对系统的各工作状态进行仿真研究,仿真与实验结果验证了系统控制算法的合理性和可行性。

    Abstract:

    A stand-alone photovoltaic (PV) power system with storage batteries is designed. Power from PV modules is sent to the load on the DC bus through a DC-DC converter, and a bidirectional converter is used for storage batteries. The storage batteries will be charged when the power from PV modules is more than the power that load needs; Storage batteries provide power for load when the power from PV modules is less than the required. Adopt the maximum power point tracking algorithm to ensure PV modules provide the maximum power under certain conditions. In terms of software, this paper describes the control procedure in the whole and gives the algorithm and software design flow chart. The simulation model is built based on MATLAB/Simulink. The simulation and experimental results prove the rationality and feasibility of stand-alone PV power system.

    参考文献
    相似文献
    引证文献
引用本文

王卓.一种独立光伏发电系统双向变换器的控制[J].机床与液压,2019,47(24):98-102.
. Control of a bi-directional converter for stand-alone photovoltaic generation system[J]. Machine Tool & Hydraulics,2019,47(24):98-102

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2020-03-12
  • 出版日期: