欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
一种新型组合成形铣刀的设计及切削力仿真研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

山西工程技术学院校级项目(2020002);阳泉经济开发区科技项目(17-016)


Design of a New Combined Form Milling Cutter and Simulation of Cutting Force
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    设计了一种新型组合成形铣刀:将3把单角铣刀,通过端面开十字沟槽的方式组合成一把铣刀,解决了加工多角度坡口零件的工艺难题;选用指数瞬时切削模型,运用Deform 3D切削仿真软件,选择不同切削参数:切削转速n(300、475、600 r/min),背吃刀量ap(05、1、2 mm),模拟铣刀精加工时零件切削力大小的变化。在转速600 r/min、切削深度为1 mm左右时,获得较为理想的切削参数,为实体加工提供依据。该组合成形铣刀的设计,提高了加工效率,为组合角度零件的加工提供思路。

    Abstract:

    A new type of combined forming milling cutter was designed:three singleangle milling cutters were combined into one milling cutter by the way of opening grooves on the end face to solve the technical problems of machining multiangle groove parts.Selecting the exponential instantaneous cutting model,using the Deform 3D cutting simulation software,choosing different cutting parameters,such as cutting speed was 300,475,600 r/min,cutting depth was 05,1,2 mm,the change of cutting force under fine milling was simulated and more ideal cutting parameters were obtained at the speed of 600 r/min and cutting depth of 1 mm.It provides basis for the machining of multiangle parts.

    参考文献
    相似文献
    引证文献
引用本文

王紫民,赵磊,王超,郭晓霞.一种新型组合成形铣刀的设计及切削力仿真研究[J].机床与液压,2020,48(20):118-121.
WANG Zimin, ZHAO Lei, WANG Chao, GUO Xiaoxia. Design of a New Combined Form Milling Cutter and Simulation of Cutting Force[J]. Machine Tool & Hydraulics,2020,48(20):118-121

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2021-04-22
  • 出版日期: