文章摘要
丁云鹏,李荣义,岳彩旭,单鑫鑫,崔勇,宁方昊.基于ESPRIT的机车轴承座加工自动编程与实现[J].机床与液压,2021,49(2):79-82.
DING Yunpeng,LI Rongyi,YUE Caixu,SHAN Xinxin,CUI Yong,NING Fanghao.Automatic Programming and Realization for Locomotive Bearing Seat Processing Based on ESPRIT[J].Machine Tool & Hydraulics,2021,49(2):79-82
基于ESPRIT的机车轴承座加工自动编程与实现
Automatic Programming and Realization for Locomotive Bearing Seat Processing Based on ESPRIT
  
DOI:10.3969/j.issn.1001-3881.2021.02.17
中文关键词: 自动编程  ESPRIT二次开发  轴承座加工
英文关键词: Automatic programming  Secondary development on ESPRIT  Bearing block processing
基金项目:江苏省高等学校自然科学研究面上项目(19KJB460021);国家自然科学基金青年基金项目(51905137);苏州市重点实验室资助项目(SZS201815);苏州工业职业技术学院科研启动经费(2017KYQD008)
作者单位E-mail
丁云鹏 苏州工业职业技术学院精密制造工程系 dyp_112@163.com 
李荣义 哈尔滨理工大学先进制造智能化技术教育部重点实验室  
岳彩旭 哈尔滨理工大学先进制造智能化技术教育部重点实验室  
单鑫鑫 苏州工业职业技术学院精密制造工程系  
崔勇 苏州工业职业技术学院精密制造工程系  
宁方昊 苏州工业职业技术学院精密制造工程系  
摘要点击次数: 73
全文下载次数: 0
中文摘要:
      在机车大尺寸轴承座零件批量生产中,多存在结构相似、尺寸不同的零件。为缩短加工编程时间,基于轴承座零件的典型特征分类与表征,进行通用的工艺方案设计。采用VB语言在ESPRIT软件中进行二次开发,建立不同特征的自动编程模板,以便快速完成不同尺寸零件的自动编程。在DMG CTX1250车铣复合加工中心上完成一组轴承座零件的加工,验证了自动编程模块的有效性。该方法可有效缩短批量零件编程时间,为智能切削加工提供一种高效的自动编程方法
英文摘要:
      In the mass production of large-size locomotive bearing block parts, there are many parts with similar structure and different size. In order to shorten the processing programming time, a general process scheme was designed based on the typical features classification and characterization of bearing seat parts. VB language was used to carry out secondary development on ESPRIT software platform, the automatic programming template for different features was established, so that the automatic programming for different size parts could be completed quickly. A group of bearing parts was machined with DMG CTX1250 turning and milling complex machining center, to verify the effectiveness of the automatic programming module. This method can effectively shorten the programming time of batch parts. It provides an effective automatic programming method for intelligent machining
查看全文   查看/发表评论  下载PDF阅读器
关闭

分享按钮