欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
基于TCP的气动手爪MCD模型虚拟调试的研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

2019年广西高校中青年教师科研基础能力提升项目(2019KY1470);广西工业职业技术学院2018年度院级科研项目(桂工业院科研2018036KY007)


Research on Virtual Debugging of MCD Model of Pneumatic Gripper Based on TCP
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用NX软件的建模模块建立一种工业机器人的双气动手爪三维模型;在其机电概念设计模块(MCD)中进行气动手爪模型的机械设计、电气设计以及自动化设计;在完成MCD模块内部信号自动化序列仿真的基础上,基于一种开放式用户通信协议TCP,实现虚拟PLC控制气动手爪模型动态仿真的虚拟仿真调试。研究结果在机电一体化概念设计以及动态虚拟仿真调试方面,为相关技术人员提供了参考。

    Abstract:

    A three-dimensional model of double pneumatic grippers of a kind of industrial robot was established by using the modeling module of NX software; the mechanical design, electrical design and automational design of pneumatic gripper model were carried out in the mechatronics concept design (MCD) module of NX; on the basis of finishing the automatic sequence simulation of the internal signals of MCD module, the virtual simulation debugging of the dynamic simulation of the pneumatic gripper model controlled by virtual PLC was realized based on an open user communication protocol TCP. The research results provide reference for related technical personnels in terms of mechatronics concept design and dynamic virtual simulation debugging.

    参考文献
    相似文献
    引证文献
引用本文

赵永信,度国旭,吴坚,黎玲萍.基于TCP的气动手爪MCD模型虚拟调试的研究[J].机床与液压,2022,50(3):70-72.
ZHAO Yongxin, DUO Guoxu, WU Jian, LI Lingping. Research on Virtual Debugging of MCD Model of Pneumatic Gripper Based on TCP[J]. Machine Tool & Hydraulics,2022,50(3):70-72

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2022-05-13
  • 出版日期: