欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
基于非线性磨削模型的稳态与颤振抑制的研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金青年科学基金项目(51405053);辽宁省自然科学基金指导计划项目(2019-ZD-0577)


Research of Stability and Chatter Suppression Based on Nonlinear Grinding Model
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在轧辊磨削过程中,选择稳态叶图边界曲线附近的参数易发生颤振,使得轧辊磨削工艺参数选择过于保守,导致磨削效率严重降低的问题。为此,通过引入Duffing振子,构建三自由度非线性轧辊磨削动力学模型。采用数值计算的方法,研究过程参数在稳态边界附近变化对轧辊磨削颤振的影响;为抑制轧辊磨削颤振,提出混沌摄动方法抑制颤振。结果表明:所提方法有良好的颤振抑制效果,为实际加工过程中参数选择和轧辊磨削颤振抑制提供参考。

    Abstract:

    The chatter vibration in the roll grinding operation occurs more easily for the selected parameters near the stability chart boundary, thus, the selected parameters in the roll grinding process are very conservation, leading to low grinding productivity. Therefore, a three DOF nonlinear roll grinding dynamic model was established by considering the Duffing oscillator. By using the method of the numerical simulation, the effects of the variation of parameters near stability chart boundary on the roll grinding chatter were performed; in order to suppress the roller grinding vibration, a chaotic perturbation method was proposed. The results show that the proposed method has good vibration suppression effect, which provides reference for parameter selection and roller grinding vibration suppression.

    参考文献
    相似文献
    引证文献
引用本文

杨铎,陈添定,李鹤,饶成飞.基于非线性磨削模型的稳态与颤振抑制的研究[J].机床与液压,2022,50(10):41-45.
YANG Duo, CHEN Tianding, LI He, RAO Chengfei. Research of Stability and Chatter Suppression Based on Nonlinear Grinding Model[J]. Machine Tool & Hydraulics,2022,50(10):41-45

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2022-06-30
  • 出版日期: 2022-05-28