欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
联轴器螺栓紧固件的有限元建模仿真和试验分析
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Finite element modeling and simulation for screw fastener in coupling and its experimental
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    研究了联轴器螺栓紧固件在复杂载荷作用下的应力状态,对分析联轴器螺纹螺栓的失效具有重要价值。采用精确几何形状螺纹建模方法对联轴器的螺纹进行了建模,并将其嵌入ANSYS软件对螺纹螺栓的预紧力、联轴器受载后的等效应力和联轴器螺纹螺栓的结构应力进行了仿真分析,并进行了试验对比研究。结果表明:所建立的模型能很好地仿真螺栓自松弛现象,可以认为螺栓松弛乃至结构的疲劳强度对扭转载荷的大小更敏感,能为深入研究联轴器螺纹螺栓的失效提供参考。

    Abstract:

    The aim of this paper is to study the stress status of the bolt fastener in coupling under complex loadings, the research result is greatly beneficial for the analysis of the failure of the screw bolt in coupling. The threads in the bolt and nut are modeled with accurately construct helical thread geometry and implanted into the ANSYS software. Research shows that the model has the ability to simulate the preload of bolt, equivalent stress of coupling under load, and structure stress of the screw bolt in coupling. The finite element results agree with the experimental observations quantitatively. 〖JP3〗In addition, the fatigue strength and the self relaxation of the screw bolt are more sensitive to the torsional load, which can provide reference for further research on the failure of screw bolt.

    参考文献
    相似文献
    引证文献
引用本文

邹爱成,蒋翔俊.联轴器螺栓紧固件的有限元建模仿真和试验分析[J].机床与液压,2016,44(6):36-39.
. Finite element modeling and simulation for screw fastener in coupling and its experimental[J]. Machine Tool & Hydraulics,2016,44(6):36-39

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-08-11
  • 出版日期: