欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
自动绕线机控制系统的研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Research on the Control System of Automatic Winding Machine
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对目前市场上封闭环状结构绕线存在人工绕制效率低和机器绕制效果差的现象,自主研发一套自动绕线机控制系统,实现了绕线自动化以及对绕线精度和张力的精准控制。运用CC-Link、RS232以及RS485总线等技术,通过PLC与各个伺服硬件等进行通信,完成控制系统的搭建。控制系统主要围绕储线、绕线以及张力调节三大功能,利用Modbus协议完成对储线功能的编程,以及通过UG运动仿真和PID控制思想对绕线功能与张力稳定控制进行程序编写,得到绕线过程中线梭轮和储线轮电机的位置关系,通过样机试验证明控制系统的有效性。

    Abstract:

    Aiming at the phenomenon of low manual winding efficiency and poor machine winding effect in the closed loop structure winding in current market, a set of self-developed automatic winding machine control system was developed,by which winding automation and precise control of winding precision and tension could be realized. Using CC-Link, RS232 and RS485 bus technology, the control system was built through communication between PLC and various servo hardwares. The control system mainly revolved around the three functions of wire storage, winding and tension adjustment. The programming of the storage line function was completed by using Modbus protocol, the programming of winding function and tension stability control was completed by the UG motion simulation and PID control idea. The position relationship between the midline shuttle wheel and the storage wheel motor in the winding process was obtained, the effectiveness of the control system was proved by the prototype test.

    参考文献
    相似文献
    引证文献
引用本文

孙志龙,贾立民,刘勇,李立杰,王华震.自动绕线机控制系统的研究[J].机床与液压,2022,50(24):54-58.
SUN Zhilong, JIA Limin, LIU Yong, LI Lijie, WANG Huazhen. Research on the Control System of Automatic Winding Machine[J]. Machine Tool & Hydraulics,2022,50(24):54-58

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2023-01-12
  • 出版日期: 2022-12-28